Kits

Loyalty Program

All Customers on the Loyalty Program take 10% off any Advertised price shown (Each Visit). If you are not on the Loyalty program just sign up at Check-out and your discounts start at your next Purchase. CBD and Discounted Items excluded from the Loyalty Program.

Try Before You Buy

Before you decide on a juice we encourage you to try any and all juices you may be interested in.
With a variety of offerings to choose from, we’re sure you’ll be happy working with us in our Vape Shops, both in person and online.

We Ship

We carry a full line of E-Cigs and Premium E-Liquids, Cartomizers, Atomizers, Tanks, Batteries, Mods, Lanyards, Replacement Coils and many other items. We have over 100 e-liquid flavors in stock. Call us direct at 1-863-420-8282 to order by phone. Shipped daily.

  • GEEKVAPE AEGIS X 200W STARTER KIT 

    The Aegis X Starter Kit by GeekVape is a 200W box mod that is designed to be both durable and reliable for the intentions of avoiding damage by accident, featuring military standard 810G-516.6 shockproof system and an IP67 waterproof and dustproof system, and can be powered by using dual high amperage 18650 (sold separately), alongside the Aegis X is the Cerberus Sub-Ohm Tank; a brand new sub ohm tank with 5.5ml capacity of e-juice with the pre-installed bubble glass tank section and 4ml with the standard straight glass and uses a half turn top fill design. The USB port is safely covered on the top of the device, secured by a silicone tab. The batteries are safely secured in with a slide to open bottom latch battery door equipped with seal ring to keep it protected from harm.

    The newest addition to the Aegis line is a large 2.4″ OLED display which shows vape stats including resistance, amps, voltage, puff counter, and dual battery life indicator. Along with the Aegis X is the Cerberus Sub-Ohm Tank; a 25mm diameter sub-ohm tank that utilizes a quarter turn top fill system and capable of holding up to 5.5ml of E-Liquid and 4ml with the straight glass tank. The Cerberus Sub-Ohm Tank utilizes the Super Mesh Coil Family which consists of the Super X1 Mesh Coil, a 0.2 ohm single mesh coil rated at 30 to 90W and the Super X2, a 0.3 ohm mesh vertical coil rated at 30 to 45W. Airflow enters the Cerberus Tank through dual adjustable bottom airflow measuring at 12mm by 2mm each airslots. Located on the top of the Cerberus is a 9mm tapered 810 wide bore drip tip and a quarter turn top fill system. The Aegis X 200W Box Mod along with the Cerberus Sub-Ohm Tank is a wonderfully designed device that boasts powerful battery life, a multitude of functions, and protection from accident for those who like to live life in the fast lane.

    Zeus Mesh Sub-Ohm Tank (Aegis X and Zeus Tank Kit)

    The Zeus uses a unique top-to-bottom airflow allowing massive flavor and vapor production to be made. This system also helps prevent leaking from over-wicking and condensation build up. The Zeus vape tank also uses GeekVape’s Zeus Mesh Replacement Coils which feature kanthal mesh coils and organic cotton. The mesh coils have a larger heating surface and heats evenly for maximum efficiency. GeekVape offers two atomizer heads to choose from; Mesh Z1 which features a 0.4 ohm mesh coil and is best used at 60 to 70 watts, and the Mesh Z2 which has a 0.2 ohm mesh coil and should be used between 70 and 80 watts. The Zeus Sub-Ohm Tank includes a pre-installed Z2 Single Mesh coil and a Z1 Mesh coil, giving users the ability to test both out for themselves.

    Product Specifications

    • 5 to 200W Output
      • GeekVape AS Chip
        • Seven Total Output Modes
      • 0.05 to 3.0 ohm Atomizer Resistance Range
    • Temperature Control Suite
      • Ni200 Nickel Support
      • Titanium Support
      • SS316 Support
      • Kanthal Support
      • POWER Support
      • TCR Mod
      • VPC Support
    • Durable through terrain
      • Military Standard 810G-516.6 Shockproof System
      • IP67 Water Proof and Dustproof System
    • 2.4 Inch Color Display
      • Amp Range
      • Output Power
      • Atomizer Resistance
      • Battery Life Indicator
      • Puff Counter
      • Neatly Displayed
      • Brightness Adjustment
        • Increase Brightness
          • Fire Button + Up Button
        • Decrease Brightness
          • Fire Button + Down Button
      • Stealth Mode
    • Carbon Steel Push to Open Bottom Latch Battery Access Door
      • Dual High Amperage 18650
        • Sold Seperately
    • Zinc, Leather, Silicone, and Aluminum Materials
    • Rubber Plugged Micro USB Port
      • 1A Charging and Updating
    • Spring Loaded Gold Plated 510 Connection
      • Powder Coated Stainless Steel
    • Low Voltage/Current/Output Short Circuit/Load/Low Resistance/Overheating
    • 90mm by 56.1mm by 31.3mm
    • Cerberus Sub Ohm Tank
      • 25mm Diameter
    • Half Turn Top Fill System
      • 5.5ml Maximum Capacity
    • Super Mesh Coil Family
      • Mesh X1
        • 0.2 ohm
        • KA1
        • Vertical Coil
        • 30 to 90W
        • 60 to 80W Recommended
      • Mesh X2
        • 0.3 ohm
        • KA1
        • Vertical Coil
        • 30 to 45W
        • 30 to 40 Recommended
    • Dual Adjustable Bottom Airflow System
      • 11mm by 2mm Each Airslot
      • Fully Closeable
    • 9mm Tapered 810 Wide Bore Drip Tip
    • Gold Plated 510
    • Stainless Steel and Glass Construction
    • Leak Proof Design
    • Top Fill Design

      Product Includes (Starter Kit)

      • One Aegis X Kit
      • One Cerberus Sub-Ohm Tank
      • One 0.2 ohm Mesh X1 Coil
        • Pre-Installed
      • One 0.15 ohm Coil Head
      • One USB Cable
      • One Spare Glass Tank Section
      • One Spare Parts Bag
      • One User Manual

      Product Includes (Box Mod Only)

      • One Aegis X Mod
      • One USB Cable
      • One User Manual

      Product Includes (Zeus Tank Starter Kit)

      • One Aegis X Mod
      • One Zeus Sub-Ohm Tank
        • One Mesh Z2 Coil 0.2 ohm
        • One Mesh Z1 Coil 0.4 ohm
      • One Coil Tool
      • One USB Cable
      • One User Manual
      • One Promotion Card and Warranty Card


    GEEK VAPE AEGIS MINI

    • The Geek Vape Aegis Mini 80W Starter Kit deploys a miniature version of the wildly popular Aegis 100W, presenting integrated 2200mAh rechargeable battery and highly advanced AS chipset within an ultra-durable and rugged chassis to pair with the Cerberus Tank. The Aegis Mini 80W is constructed of dependable zinc alloy combined with leather inlays for ergonomic hold, and SLI Silicon for intense durability for the chassis. The implementation of the advanced AS chipset within the Aegis Mini, offering wattages from 5 to 80W, a near-instantaneous firing speed of 9ms, and a slew of protections to keep the vape and user safe. In addition, the integrated 2200mAh rechargeable battery can last throughout the day and potentially longer than the filled pod as well. This allows for the Aegis Mini to be used on-the-go as no extra bottles of juice, batteries, or other auxiliary vape equipment must be brought along. Furthermore, the Aegis Mini is paired with the Geek Vape Cerberus 25mm Sub-Ohm Tank, presenting a threaded top fill system, a 5.5mL juice capacity, and a simplified dual slotted bottom airflow ring. The Cerberus utilizes the Super Mesh X2 Coil System, rated for 30 to 45W for a low-to-medium vaporization of today’s popular vape juice.

      Quick Links:
      Geek Vape Super Mesh Replacement Coils

      Geek Vape Aegis Mini 80W Box Mod Features:

      • Advanced AS Chipset
      • Integrated 2200mAh Rechargeable Battery
      • Wattage Output Range: 5-80W
      • Temperature Control Range: 200-600F
      • Stainless Steel, Ni200, and Titanium Supported
      • Power Mode
      • TC Mode
      • Bypass Mode
      • Zinc Alloy, Leather, SLI Silicon Chassis Construction
      • Ergonomic Grip
      • Intuitive Display Screen
      • Oversized Intuitive Firing Button 
      • Two Adjustment Buttons
      • Dustproof, Shockproof, and IP67 Waterproofing
      • Short-Circuit Protection
      • 10s Cut-Off Protection
      • Over-Heat Protection
      • Over-Current Protection
      • Over-Charging & Discharging Protection
      • Anti-Dry Protection – Temperature Control Mode only
      • MicroUSB Charging Cable
      • Centered 510 Connection
      • Available in Black & Green, Stealth, Black & Blue, Camo & Gunmetal, Black & Red
      • Limited Edition – U.S. Flag, Christmas – Red & Gold, Christmas Black & Gold

       


    VOOPOO VINCI X

    • Introducing the Voopoo VINCI X Pod Mod Kit, a versatile vaping system that can be geared for nicotine salts or regular eJuice, featuring the advanced Gene.AI Chipset, powered by a single 18650 battery, and can be used in an MTL or DTL fashion. Featuring the newest generation of Gene.AI Chipsets, the Voopoo VINCI X Pod Mod can attain wattages between 5-70W and is equipped with plenty of protections and safeties to ensure a pleasurable and safe vaping experience. However, the beauty of the VINCI X Pod System lies further deeper than the visually striking zinc-alloy frame and decorative panels, instead lying in the versatility of the VINCI X Pod Kit. Supporting DTL and MTL vaping, the VINCI X can change airflow by rotating the pod 180º and reinstalling it with the sturdy magnetic connection. In addition, the VINCI X Pod Kit can be outfitted with a myriad of coils from the Voopoo PnP Coil Series with the intelligent Gene.AI Chipset autodetecting and adjusting the wattage accordingly to prevent burnt coils. Powered by a single 18650 battery, which is not included, it can be installed at the bottom, behind a threaded battery cap.

      Quick Links:
      Voopoo VINCI Replacement Pods
      Voopoo PnP Replacement Coils

      Voopoo VINCI X 70W Pod Mod Kit Features:
      Gene.AI Chipset
      Dimensions – 117mm by 29.5mm by 25.3mm
      Single High-Amp 18650 Battery – Not Included
      Wattage Output Range: 5-70W
      Voltage Output Range: 3.2-4.2V
      Resistance Range: 0.1-3.0ohm
      2 Week Usage Memory
      Zinc-Alloy Chassis Construction
      Intuitive Firing Button
      0.96″ TFT Color Display Screen
      Two Adjustment Buttons
      5.5mL Refillable Large Leak-Proof Pod
      Side Fill System – Silicone Stoppered
      Compatible with E-Liquid & Nicotine Salts
      VooPoo PnP Coil Series
      0.3ohm PnP-VM1 Mesh Coil – rated for 32-40W (DL)
      0.6ohm PnP-VM4 Mesh Coil – rated for 20-28W (DL)
      0.45ohm PnP-M3 Single Coil – rated for 28-35W (DL)
      0.8ohm PnP-R1 Dual Coil – rated for 12-18W (MTL)
      1.0ohm PnP-R2 Dual Coil – rated for 10-15W (MTL)
      1.2ohm PnP-C1 Ceramic Coil – rated for 10-15W (MTL)
      Plug ‘n’ Play Coil Installation
      180° Reversible Pod Airflow – Airflow Changes with Insertion
      Threaded Bottom Battery Cap
      Overtime Protection
      Short-Circuit Protection
      Overcharge Protection
      Max Power Protection
      Output Over-Current Protection
      Over Discharge Protection
      Over Temperature Protection
      Battery Reverse Protection
      MicroUSB Port
      Available in: Scarlet, Teal Blue, Ink, Dazzling Green, Space Gray, Carbon Fiber, Aurora

      Standard Package Includes:


    VOOPOO VINCI

    • Discover the VOOPOO VINCI 40W Pod Kit, a stunning 1500mAh battery device with GENE AI Chipset and utilization of VOOPOO PnP Coil Technology with 0.3ohm VM1 Mesh, all within a visually-striking pod mod design. Fitting at the top of the pod system is a 5.5mL refillable pod, holding a generous supply of your favorite eJuice or nicotine salts as the VINCI supports both. In addition the VINCI Pod System utilizes coils from the convenient VOOPOO PnP Coil Series, adopting any in the series, but also introduces the new 0.3ohm PnP-VM1 Mesh Coil, designed for DTL vaping as it effectively vaporizes the eJuice with ease. Installed with the new and revamped GENE AI Chipset, the VINCI features many intelligent features such as coil protection, preventing any dry burn hits and offering quality of life enhancements like a two week log of vaping history or a full range of specs shown on the 0.96″ TFT Color Screen. Firing on a draw-activated mechanism, the VINCI Pod Kit can be adjusted in wattage or voltage mode, dialing in the preferred vaping settings for each individual user. Furthermore, the VINCI is euipped with an auto and manual mode, firing by either a draw-activated firing mechansim or pressing the intuitive firing button.Quick Links:
      Voopoo VINCI Replacement Pods
      Voopoo PnP Replacement Coils

      VOOPOO VINCI 40W Pod Kit Features:

      • Intelligent GENE Pod Chip
      • Dimensions – 104mm by 25.3mm by 25.3mm
      • Integrated 1500mAh Rechargeable Battery
      • Wattage Output Range: 5-40W
      • Voltage Output Range: 3.2-4.2V
      • Resistance Range: 0.1-3.0ohm
      • 3 Power Levels – 3.2V, 3.5V, 3.8V
      • Auto Mode
      • Manual Mode
      • Puff Curve Mode
      • 2 Week Usage Memory Log
      • Aluminium-Alloy & Plastic Chassis Construction
      • Draw-Activated Firing Mechanism
      • Two Adjustment Buttons
      • Juice Viewing Window – Check Fill Level
      • 0.96″” TFT Color Screen
      • Refillable Pod – Replaceable Coil
      • 5.5mL Refillable Pod Capacity
      • Voopoo PnP Coil Series
      • 0.3ohm PnP-VM1 Mesh Coil – rated for 32-40W (DTL)
      • 0.8ohm PnP-R1 Dual Coil – rated for 12-18W (MTL)
      • Plug ‘n’ Play Coil Installation
      • Intelligent Coil Protection
      • Dry Burn Protection
      • MicroUSB Port
      • Available in Aurora, Dazzling Green, Space Grey, Carbon Fiber, Peacock, Scarlet, Ink, Opal, Hill Yellow, Jade Green


    FREEMAX TWISTER

    • The FreeMaX Twister 80W Starter Kit is a sensational vape pen with vibrant graphics, featuring an integrated 2000mAh rechargeable battery, a wattage adjustment dial knob, and is paired with the new Fireluke 2 Mesh Tank. Combined with the innovation that stems from FreeMax, the Twister is screenless to extend the life of the battery and utilizes a wattage adjustment dial at the very base to help maintain the clean silhouette to allow the exquisite graphics to vibrantly pop. In addition, the Twister comes with a slew of protections thanks to the Twister Chipset within to protect the device and user. The integrated 2000mAh rechargeable battery can power the Twister for prolonged vaping sessions before a recharge is needed. Furthermore, the FreeMax Twister 80W Mod is paired with the new FreeMax Fireluke Mesh 2 Tank. The FireLuke  2 Tank features a 4.5mL maximum eJuice capacity, dual bottom airflow control, a brand new set of flavor-enhanced FireLuke Mesh Coils!

      Note: The FireLuke Mesh 2 is not compatible with the FreeMax Mesh Pro Coils. It is only cross-compatible with the original FireLuke Mesh.

      Quick Links:
      FreeMax FireLuke Mesh Coils 
      FreeMax FireLuke 2 Replacement Glass

      FreeMaX Twister 80W Starter Kit Features:

      • Dimensions – 101.5mm by 24mm
      • Twister Chipset
      • Integrated 2000mAh Rechargeable Battery
      • Battery Efficiency: 95%
      • Wattage Output Range: 5-80W
      • Voltage Output Range: 0.5-9.0V
      • Resistance Range: 0.1-3.0ohm
      • Zinc Alloy Chassis Construction
      • Single Button Operation
      • Oversized Intuitive Firing Button
      • Bottom Wattage Adjustment Dial
      • Ultra Fast Firing Speed: 0.01s
      • Overtime Protection
      • Over-Heat Protection
      • Overload Protection
      • Over-Charge Protection
      • Battery Virtual High Protection
      • Short Circuit Protection
      • MicroUSB Port
      • Centered 510 Connection

      FreeMaX Fireluke 2 Mesh Sub-Ohm Tank Features:

      • 24mm Diameter
      • 3mL Juice Capacity
      • 4.5mL Bubble Juice Capacity
      • Superior Stainless Steel Chassis Construction
      • Slide-to-Open Top-Fill Design – 8.5mm by 2.8mm Fill Port
      • Fill Port Vent Hole – Prevents Positive Pressure Build-Up
      • Dual Slotted Bottom Airflow Control
      • FreeMaX Fireluke Mesh Coil Family
      • 0.15ohm X1 Mesh Coil – rated for 40-90W
      • 0.2ohm X2 Mesh Coil – rated for 40-80W
      • 0.15ohm X3 Mesh Coil – rated for 50-90W
      • Anti-Spitback Widebore 810 Drip Tip
      • Gold-Plated 510 Connection


    SUORIN AIR PLUS

    • The Suorin AIR Plus Pod System elevates the original Suorin Air V2 to new heights, integrating an upgraded 930mAh rechargeable battery, improved 3.2mL pod capacity, and two different cartridges for free-based and nicotine salts E-Liquid. Upgrading the pod capacity from 2.0mL to 3.2mL, the Suorin AIR Plus contains much more juice than its predecessor, eliminating the need for refills. Along the same lines, Suorin has revisited the integrated battery within, improving the capacity to a whopping 930mAh rechargeable battery with 5-Levels LED Lights for indicators. At the base of the reinvented pod, Suorin has included the new Oil Baffle Design, preventing eLiquid from leaking from the central gold-plated metal contacts. Suorin has now provided two options for the pods, one measuring 0.7ohm optimized for free-base nicotine and 1.0ohm for nicotine salts, respectively.Quick Links:
      Suorin Air PLUS Replacement Pods

      Suorin Air PLUS Pod System Features:

      • All-In-One Design
      • Dimensions – 93.2mm by 49.9mm by 9.9mm
      • Integrated 930mAh Rechargeable Battery
      • Max Wattage Output: 22W
      • Voltage Output Range: 3.3-4.2V
      • Superior Zinc-Aluminium Alloy Chassis Construction
      • Draw-Activated Firing Mechanism
      • Fillable Pod System – Replaceable Cartridge
      • 3.2mL Juice Capacity
      • 0.7ohm Resistance – Optimized for Free-Based E-Liquid
      • 1.0ohm Resistance – Optimized for Nic Salts E-Liquid
      • Horizontal Coil Atomizer
      • Organic Cotton
      • Bottom Fill System – Silicone Stoppered
      • Oil Baffle Design – Prevents Leaks
      • Gold-Plated Magnetic Connection
      • Not Compatible with Suorin Air Pods
      • 5-LED Battery Life Indicator Light
      • MicroUSB-C Port
      • Available in Black, Silver, Mocha Grey, Red, Gold, Teal Blue
      • Not Compatible with Original Suorin AIR Pods


    VOOPOO DRAG NANO

    • The VOOPOO DRAG NANO Starter Kit continues the legacy of the legendary DRAG series, pioneering new pod technology with the Intelligent Cold Boot Pattern managed by the GENE Pod Chipset alongside a 750mAh integrated rechargeable battery. The DRAG NANO Pod System is formed from durable zinc-aluminium alloy, protecting the highly advanced GENE Pod Chipset and 750mAh rechargeable battery that is built-in. Unlocking a slew of protections to safeguard the device and user from hardware failure, the DRAG Nano Pod System is safe for use and general operation. It excels at demystifying the complex layers of nicotine salt eJuices to coax the elaborate flavors out. In addition, the GENE Pod Chipset utilizes the new Intelligent Cold Boot Pattern, further unraveling the complicated notes and aromas by providing a consistent hit throughout the day. Fitted with draw-activated firing mechanism, the DRAG NANO is at the beck and call of the user, readily available and always reliable. The DRAG Nano Pod features a 1mL juice capacity in each cartridge, fitted with top-fill mechanism and a 1.8ohm coil structure to maximize flavors and cloud productions.Quick Links:
      VOOPOO Drag Nano Replacement Pods

      VOOPOO DRAG NANO Pod System Features:

      • Gene.Pod Chipset
      • Dimensions – 54.5mm by 35mm by 11mm
      • Integrated 750mAh Rechargeable Battery
      • Voltage Output Range: 3.2-4.2V
      • Resistance: 1.8ohm
      • Zinc-Aluminium Alloy Chassis Construction
      • LED Battery Life Indicator Light
      • Draw-Activated Firing Mechanism
      • Intelligent Cold Boost Pattern
      • Precise Output Power Control System
      • Switch Timeout
      • Short-Circuit Protection
      • Overcharge Protection
      • Over Discharge Protection
      • Output Over-Current Protections
      • Magnetic Pod Connection
      • Available in Klein Blue, Tidal, Ceylon Yellow, Fiesta, INK, Aurora, Nebula’s Blue

      VOOPOO DRAG Nano Replacement Pod Features:

      • 1.0mL Juice Capacity
      • Pod Coil Resistance: 1.8ohm
      • Food-Grade Plastic Pod Construction
      • Top Fill System – Silicone Stoppered

      Includes:

      • 1 VOOPOO DRAG NANO MOD
      • 1 VOOPOO DRAG NANO POD
      • 1 Necklace Chain
      • 1 MicroUSB Cable
      • 1 User Manual
      • 1 Warranty Card
      • 1 GENE CHIP CARD


    UWELL VAPE WATCH

    • UWELL presents the Amulet Pod System Vape Watch! The first of its kind, the Amulet combines a fully functional open pod vape system with a functioning watch design. Love it or hate it, the Amulet from UWELL is a convenient way to carry your vape pod system anywhere you go.The Amulet as a watch features a time and date setting, with the time format being in military time. A press of the side button will allow the user to view the current time and date, while three click of the button will enter the adjustment mode. There are two touch screen adjustment buttons located on the face of the watch to make any adjustments to the time and date. The screen is also features a rotation function by clicking the button four times. The watch housing is made of durable plastic, while the watch band is made from rubber with a metal nub to secure the bands fitting.

      And now for the fun part. The Amulet pod vape system is secured in the housing by slipping the drip tip side into the housing itself, and then pressing it down until the release button clicks into place. Simply press the release button to remove the Amulet from the housing. UWELL designed the Amulet to be as low profile as possible while retaining vaping function and decent battery life. The Amulet has a built-in 360mAh battery and micro USB charging port. At the core of the pod system is an advanced circuit board design that offers the user multiple safety protections and a stable power supply to the pod. The pod itself features a 1.6 ohm coil and holds up to 2ml of salt nic vape juice.

      Check out Zophie Vapes’ UWELL Amulet Video Review HERE!

      Product Specifications

      • Pod Vape System
        • Dust-Proof PCB
        • 10W Output
        • Draw Activated Firing
        • 370 mAh Internal Battery
        • Built-In Safety
          • 8 Second Draw Cut-Off
          • Open Circuit Protection
          • Short Circuit Protection
          • Low Power Indicator
          • Over Temperature Protection
      • Proprietary Pod
        • 2ml Capacity
        • 1.6 ohm
        • Bottom Fill
          • Silicone Fill Plug
      • Watch Features
        • Time and Date Display
          • Military Time Only
          • Adjustable
        • Single Button Control Interface
          • Touch Screen Adjustment
        • Screen Rotation Feature
          • Left or Right Hand Operation
        • Plastic Housing
        • Rubber Watch Band

      Product Includes

      • One Amulet Pod System Vape Watch
      • One 1.6 ohm Pod
      • One User Manual
      • One USB Charging Cable


    • Vape Pen Nord 22 Starter Kit by SMOK – 2000mAh 3.6mL

      Get more Nord with the new Vape Pen Nord 22 Starter Kit by SMOK. Taking the awesome coil technology of the SMOK Nord, the new Vape Pen Nord 22 brings you more tank capacity and more battery life. This means you can vape longer with this new kit!

      How does it compare to the original SMOK Nord pod kit?

      As far as flavor, it’s going to be the same. This is because the Vape Pen Nord 22 uses the same coils as the original SMOK Nord. But what sets the new Vape Pen Nord 22 apart from the pod kit is that it brings you more tank capacity and more battery life.

      The original SMOK Nord can hold 3mL of vape juice. The new Vape Pen Nord 22 can hold 3.6mL. It may not seem like much of a difference, but the design makes up for that. The Vape Pen Nord 22 features a top fill method. Simply unscrew the top fill cap and you can fill up with less mess! Quicker, simpler, and cleaner than the original SMOK Nord.

      The Vape Pen Nord 22 also has much more battery life. 1100mAh with the original SMOK Nord vs. 2000mAh with the Vape Pen Nord 22. That’s almost double! And you can still easily charge via USB.

      Pen-Shape Design for Ultimate Portability

      To achieve more battery and tank capacity, the Vape Pen Nord 22 had to be bigger than the original SMOK Nord. But SMOK fixes this by redesigning the shape completely. The Vape Pen Nord 22 is now pen-shaped so it can fit its new features. Beyond what has already been mentioned, the Vape Pen Nord 22 also boasts 2 airflow slots to give you a better inhale.


      COMPATIBLE REPLACEMENT COILS:

      ✔ SMOK – Replacement Coils – Nord Starter Kit (5 Pack)


    SMOK NORD

    • The SMOK NORD Ultra Portable Pod System draws inspirations from the elegant NOVO, integrating a long-lasting 1100mAh rechargeable battery and a refillable 3mL cartridge design capable of utilizing mesh and ceramic coils. Maintaining the signature cobra-plated panels, the SMOK NORD Pod Kit offers phenomenal handling with compact size and weighted feel for an amazing in-hand vape experience. The rechargeable 1100mAh internal battery offers one of the bigger capacity in the pod system segment, activated via a single-button operational device. The NORD Pod System has a maximum capacity of 3mL, featuring a refillable cartridge design with replaceable coil system. The kit includes a pair of 0.6ohm Nord Mesh Coil catering to the sub-ohm, cloud-focused segment while the 1.4ohm Nord Traditional Coil is suited for MTL-draw users and nic salts. There is an optional use with the 1.0ohm Nord Ceramic Coil – sold separately in the link below.Quick Links:
      SMOK NORD Replacement Coils
      SMOK NORD Replacement Pods

      For tutorials on how to use the SMOK NORD or an intuitive look of the product, please feel free to view the videos below.

      Due to the nature of design, manufacturing, and unique resin elements, each SMOK NORD in Resin Edition features its own distinctive colorway and patterning. Photos are for reference.

      SMOK NORD Ultra Portable System Features:

      • Dimensions – 94mm by 30mm by 18.8mm
      • Weight – 80g
      • Integrated 1100mAh Rechargeable Battery
      • Wattage Output Range: 10-15W
      • Voltage Input Range: 3.3-4.2V
      • Charging Current: 370mA
      • Direct Voltage Based Output
      • One-Button Firing Mechanism
      • LED Light Battery Indicator
      • Cobra Plated Panels – Exquisite Design
      • 3mL Juice Capacity – Fillable Pod System
      • Replaceable Coil Design
      • 0.6ohm Nord Mesh Coils – Optimized for Sub-Ohm Experience
      • 1.4ohm Nord Regular Coils – Optimized for MTL Experience
      • 1.0ohm Nord Ceramic Coils – Sold Separately
      • Air-Driven Pod System
      • Ergonomically Curved Mouthpiece
      • 8 Seconds Cut-Off Protection
      • Short-Circuit Protection
      • Low Voltage Warning
      • MicroUSB Port Charging System
      • Propreitary Magnetized Connection
      • Available in Full Black, Prism Rainbow, Prism Gold, Bottle Gold, Red, White Black
      • RESIN Edition – Black / White, Red / Yellow, Blue / Black, Green Red, Yellow / Purple, Blue / Brown, IML 7-Color Rainbow Resin Streak
      • CARBON FIBER Edition
      • Paint Edition – Brick Red Shell, 7-Color Oil Painting, 7-Color Spray
      • Shell Edition – Purple, Gold, Blue, 7-Color Rainbow
      • Camouflage Edition – Black, Blue, Gold, Red


    Smog Mag Grip Kit

    The SMOK Mag Grip 100W TC Starter Kit with TFV8 Baby V2 pays homage to the SMOK Mag series while expanding in style, comfort, and versatility. This stunning device maintains a trigger style firing button and a magazine-type battery loading mechanism that mimics the appearance of a real gun. The handheld Mag Grip Mod has compact dimensions of 91.5mm x 67mm x 38mm and a sturdy weight of 252g. Utilizing a coin shaped button on the side of the mod, you can release the battery docking bay and quickly lock and load your device. The Mag Grip takes a single high amp 20700, 21700, or 18650 battery (not included) that can be charged through a convenient Micro-USB port. This industry standard Micro-USB port is capable of 2A quick charging and upgrading firmware as it becomes available. While using a single 21700 or 20700 battery, the Mag Grip is capable of firing up to 100W. While using a single 18650 battery with the included 18650 battery sleeve, this device can fire up to 85W. Your battery will send power to a 0.66 inch high definition OLED screen that uses starkly contrasting black and white colors to clearly display your pertinent vaping data. This HD screen is slightly tilted so you can more easily view your current wattage, vaping effect, resistance, voltage, and battery life as you vape. The screen is top-mounted on what resembles the hammer of a gun right next to up/down buttons that smoothly blend in with this ergonomic design. With Variable Wattage mode, you can set your wattage from 1-100W with Hard, Normal, or Soft vaping effects within resistances of 0.1-2.5 ohm. Temperature Control mode allows you to vape at 200-600F (100-315C) within resistances of 0.05-2.0 ohm. The SMOK Mag Grip Mod has a standby current of less than 220uA while outputting voltages from 0.5-9.0V. Safety features installed in the SMOK Mag Mod include intelligent atomizer recognition, puff monitoring system, ten second cut-off, short-circuit protection, over-heating protection, and over discharge protection.

    Attached to the SMOK Mag Grip 100W Mod by a 510 threaded Gold-plated connection for improved conductivity is the SMOK TFV8 Baby V2 Sub-Ohm Tank. The TFV8 Baby V2 Tank is made of superior Stainless Steel and durable Pyrex glass that together compose dimensions of 54mm x 30mm and an ultra lightweight of 65g. On the top of this tank is a specialized 16mm wide-bore Delrin drip tip that assists in delivering quality airflow. To customize your TFV8 Baby V2, SMOK has made it compatible with their line of uniquely colored Resin drip tips with wild Cobra design. Below the drip tip is a rotary top cap with a slide to open top filling method that now has the gasket underneath the top cap for better leak resistance. This convenient rotary top cap allows access to a large 5mL e-liquid capacity glass reservoir through an appropriately sized fill port. For this kit, SMOK has pre-installed inside the TFV8 Baby V2 the new SMOK Baby V2 S1 Coil Head. The 0.15 ohm S1 Coil has single KTR mesh heating material rated for use between 40-80W but recommended for best use at 60-70W. The other included coil is the 0.15 ohm SMOK Baby V2 S2 Coil Head with quadruple coils made of Nickel-Chromium. The SMOK V2 S2 Coil Head is rated for use between 30-70W but is recommended for best use at 45-60W. These high performance atomizer heads are designed to produce massive vapor clouds while maintaining exquisite flavor. Further assisting in cloud production and airflow are dual bottom adjustable air slots that can range from fully opened to fully closed for a custom draw. With the release of this kit, SMOK has also made available the SMOK Baby V2 K1 Coil Head and SMOK Baby V2 K4 Coil Head. The SMOK Mag Grip 100W Starter Kit offers so much versatility and comfort from the inside out that you’ll want this new ultra portable device as part of your collection.

    SMOK Mag Grip 100W TC Starter Kit with TFV8 Baby V2 Features

    • Dimensions: 38 x 67 x 145mm (D x W x H)
    • Ergonomic Design
    • Output Mode: VW / VV / VT-Ti / VT-Ni / VV-SS / TCR
    • Output Wattage: 1 – 100W
    • Output Voltage: 0.5 – 9V
    • Resistance Range (TC): 0.05 – 2 ohm
    • Resistance Range (VW): 0.1 – 2.5 ohm
    • Temperature Range: 200 – 600°F (100 – 315°C)
    • Display: 0.66″ OLED Display
    • Battery: 1 x 18650 / 20700 / 21700 (Not Included)
    • Firmware Upgradable
    • Tank Capacity: 5ml
    • Top Filling
    • Airflow: Dual Bottom Adjustable Airflow
    • Fully Closeable
    • Safety Features: Intelligent Atomizer Recognition / Short Circuit Protection / Puff Monitoring System / Over-Heating Protection / 10s Cut-Off / Over Discharge Protection

    SMOK Mag Grip 100W TC Starter Kit with TFV8 Baby V2 Content

    • 1 x Mag Grip Mod
    • 1 x TFV8 Baby V2 Tank
    • 1 x Baby V2 S1 Mesh Vape Coil (Pre-Installed)
    • 1 x Baby V2 S2 Mesh Vape Coil
    • 1 x Glass Tube Replacement
    • 1 x 18650 Battery Adapter
    • 1 x Micro USB Cable
    • 1 x User Manual
    • 1 x Spare Parts

    .

    Eleaf Nowos Kit

    • Introducing the new legend of vaping world. Eleaf iStick NOWOS is leading the way with the innovative LED digital display and touch buttons, where aesthetic looking meets easy operation. It houses a mighty 4400mAh battery and supports QC3.0 / PD3.0 protocol for faster charging than ever. Another revolution is the use of TYPE C. Unlike older USB cable, it doesn’t matter which side is up with the TYPE C. Designed to be exceptional in every way, the ELLO Duro atomizer that is paired with the iStick NOWOS also comes with two new kinds of dual mesh coil: the HW-M Dual 0.2ohm Head & the HW-N Dual 0.25 ohm Head, bringing you the best vaping experience.


    Aspire Spryte AIO Kit

    The Aspire Spryte AiO Kit is a single button activated ultra portable device with a built-in 650 mAh battery, utilizes two types of BVC Technology Coils and a replaceable cartridge system, and adjustable airflow control. The Aspire Spryte comes with a regular 1.8 ohm BVC coil rated at 4.2 to 5.0V and the 1.2 ohm BVC coil meant for salt nics rated at 10 to 12W. The Spryte is powered by a built-in 650mAh battery and can be charged via USB Cable. The Spryte utilizes a refillable 3ml refillable Cartridge that can be easily filled via the orange tab located underneath; next to the fill port and under the coil is an adjustable airflow section measuring at 5mm by 1mm. The device also features a smart LED display that indicates blue and red for 3.8 or higher, blue for 3.8 to 3.5, and red for 3.5 or lower. The Aspire Spryte AiO Starter Kit offers portability and accommodates ample juice capacity to provide an excellent on-the-go device.

    Quick Links:
    Nicotine Salts E-Liquid

    Product Features:

    • Ultra Portable System
      • Single Button Activated Firing
      • 12W Output Range
    • Refillable Cartridge System
      • 3ml Capacity
      • Proprietary Connection
      • Bottom Fill
      • Bottom Adjustable Airflow
        • 5mm by 1mm
        • Located Under the Replaceable Cartridge
    • Aspire Spryte Coil Family
      • Regular BVC Coil Head
        • 1.8 ohm
        • 4.2 to 5.0V
      • BVC Coil for Nic Salts
        • 1.2 ohm
        • 10 to 12W
    • 650 mAh Built In Battery
      • LED Battery Life Indicator
        • 3.8 Volts or Higher
          • Red and Blue Light
        • 3.8 to 3.5V
          • Blue Lights
        • 3.5V or Less
          • Red Light
      • USB Charge Port
        • Up to 1000mA Charge Current
    • Automatic Cut Off/ Short Circuit Protection/ Low Voltage Protection/ Overcharge Protection/ Over Heat Protection

    Product Dimensions:

    • 108mm by 26mm by 26mm


    Product Includes:

    • One Aspire Spryte AiO Kit
    • Two BVC Replaceable Coils
      • One 1.8 Ohm Coil Head
      • One 1.2 Ohm Coil Head
    • Two Extra O-Rings
    • One Silicone Seal
    • One Micro USB Cable

    Drag 2 Mini Kit

    • The VOOPOO Drag Mini Kit is Powered by inbuilt 4400mAh battery, Drag Mini supports a powerful output of 117W. As a new generation of drag, the Drag Mini is more reliable than you have ever imagined. The Drag Mini MOD adopts GENE.FIT chip. The innovative FIT mode brings both security and convenience to vapers. FIT is a mode that can protect tanks to the most with its intelligent matches of FIT 1/2/3. The UFORCE T2 Tank is an innovative subohm tank empowered with strong clouds and an optimal flavor. The UFORCE T2 can also prevent the e-juice leakage by pushing the top cap. Just get the VOOPOO Drag 2 Kit and enjoy an out-of-this-world vape.

      It’s the most powerful pocket kit ever.


    Snow wolf Mini 100w

    SnowWolf introduces the Mini 100W TC Starter Kit, a portable redesign of the SnowWolf MFENG 200W TC Starter Kit with a single 21700 battery capacity, a full temperature control suite, and comes with the Snowwolf Mini Sub-Ohm tank. The Snowwolf Mini has a 10 to 100W output range, 1.0 to 7.5V output range, and a 0.05 to 3.0 ohm atomizer resistance range. The temperature control suite supports Ni200, Titanium, and Stainless Steel 304, 316, and 317. The Temperature control also comes with TCR functionality and a temperature range of 212 to 572 degrees Fahrenheit. The Snowwolf Mini features a three button control interface with an oversized firing button and two adjustment buttons along the side of the device. In the middle of the interface is a 0.91 inch OLED display that displays output wattage, output temperature, battery life indicator, and atomizer resistance. The Snowwolf Mini Kit has a micro USB charge port that can also be used to update the software of the device. The Snowwolf can accommodate a single 21700/20700/18650 battery (sold separately) and can be accessed through a threaded battery cap. The Snowwolf Mini 100W Box Mod is made of Zinc Alloy, PC, and ABS Fireproof Materials. This box mod features a spring loaded gold plated 510 connection. The Snowwolf Mini 100W Starter Kit comes with the Snowwolf Wolf Mini Sub-Ohm Tank, a 25mm sub-ohm tank with 5ml bubble glass juice capacity and stainless steel 303 and glass construction. This sub-ohm tank can be refilled with your favorite E-Liquid through a quarter turn top cap that is turned to expose the fill port. The Snowwolf Wolf Mini uses the WF Mini Replacement Coils: the WF-H mini coils are 0.25 ohm and have a wattage range of 40 to 80W. The WF mini coils have an atomizer range of 0.28 ohm and a wattage range of 30 to 60W. The Snowwolf Mini has dual adjustable 7mm by 2mm air ports that are easily adjusted with the air flow adjustment ring. The drip tip is a 7mm bore 510 resin drip tip. The Snowwolf Mini 100W Starter Kit is a great choice for beginners looking for a fierce design and great all around performance.

    Quick Links:
    Shop Battery Chargers
    Shop All Batteries
    Monthly Featured E-Liquids

    Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of two. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.

    Snowwolf Mini 100W TC Box Mod Features:

    • SnowWolf Mini Chip Set
      • 10 to 100W
      • 1.0 to 7.5V Output Range
      • 0.05 to 3.0 ohm Atomizer Resistance Range
    • Temperature Control
      • Ni200 Nickel Support
      • Titanium Support
      • Stainless Steel Support
        • 304
        • 316
        • 317
      • TCR Functionality
        • Temperature Coefficient of Resistivity
      • 212 to 572 Degrees Fahrenheit
    • Three Button Control Face
      • Oversized Firing Button
      • Adjustment Buttons
    • 0.91 Inch OLED Display
      • Output Wattage
      • Output Temperature
      • Battery Life Indicator
      • Atomizer Resistance
    • Micro USB Charge and Update Port
    • Threaded Battery Access Cap
      • Accepts One 21700/20700/18650 Battery
      • Sold Seperately
    • Zinc Alloy, PC, and ABS Fireproof Materials Construction
    • Spring Loaded Gold Plated 510 Connection
    • Reverse Polarity/Short/Low Resistance/Low Battery/Overheat Protection

    Product Dimensions

    • 81.3mm by 54mm by 30mm


    WOLF Mini Sub-Ohm Tank Product Feature:

    • 25mm Diameter
    • Quarter Turn Top Fill System
      • 5ml Bubble Glass Maximum Capacity
    • WF Mini Coil Family
      • WF-H Mini Coil
        • 0.25 ohm
        • 40 to 80W
      • WF Mini Coil
        • 0.28 ohm
        • 30 to 60W
    • Dual Adjustable Bottom Airflow
      • 7mm by 2mm Per Air Slot
      • Fully Closeable
    • 7mm Wide Bore Delrin 510 Drip Tip


    Product Includes:

    • One Mini 100W TC Mod
    • One WOLF Mini Sub-Ohm Tank
    • One WF Mini Coil
    • One Glass Tube
    • One Sealing Ring
    • One Micro USB Cable
    • User Manual and Warranty Card

    Wismec Active Kit

    Wismec Active mod is an innovative and avant-garde box mod from Wismec which you can vape while listening to music because of the innovative Bluetooth technology. Covered by the unique silicone case, it is shockproof and waterproof, which means it can still play music under water. Moreover, you can still enjoy your vaping even if the device has been damped by water or rained. Powered by a 2100mAh built-in battery, the Active box mod is capable of firing up to 80W, and it supports VW/Bypass/TC-Ni/TC-Ti/TC-SS/TCR mode. Besides, there is a 0.91inch OLED screen shows essential information. 3 colors to choose.

    Parameters

    Size: 55.6mm*26.6mm*94.5mm
    Output wattage: 1-80W
    Output mode: VW/Bypass/TC-Ni/TC-Ti/TC-SS/TCR mode
    Resistance range: 0.05-1.5ohm for TC modes, 0.05-3.5ohm for VW mode
    Temperature Range: 100-315°C/200-600°F (TC modes)
    Maximum Charging Current: 2A
    Maximum Output Current: 50A
    Output Voltage Range: 0.5-9V
    Thread type: 510 spring loaded connector

    Wismec Active Mod comes with

    1 * WISMEC ACTIVE Mod
    1 * Vapesourcing exclusive Free Gift
    1 * Connector
    2 * User Manual
    1 * Warning Card
    Spare Parts

    SPECIFICATION

    Features

    1. Built-in 2100mAh battery with 80W max output, supporting VW, TC, TCR and Bypass Modes
    2. 0.91inch OLED screen shows essential information
    3. 100% Waterproof, Vaping at Ease
    4. Shockproof yet Shatter-resistant, First-class Quality
    5. Compact yet Portable, A Must-have for Vapers on the Go
    6. Colorful Silicone Case, Each one is Unique
    7. Multiple Circuit Protection Systems Applied

    GUARANTEE

    3 Months for Battery/ Mod. Atomizer & Accessories are DOA (Dead On Arrival), please contact us within 72 hours of delivery.

    ORDERING TIPS

    Package

    Simple paper box. Customary Packing from the factory, the packing is subject to change without notice.

    I JUST 3 KIT

    The Eleaf iJust 3 80W Starter Kit is the updated rendition of the iJust series, delivering a beautifully crafted vape pen system integrate with 3000mAh rechargeable battery to pair with the new ELLO Duro Sub-Ohm Tank. The iJust 3 measures 25mm in base diameter and 136mm in total length, implementing a natural round form factor with elegant pattern designs offered in a wide array of color options. The iJust 3 Kit is charged via microUSB port, with 4-color LED battery indicators for the 3000mAh internal battery. The iJust 3 implements a single button firing mechanism, in which output power correlates to the current state of battery. Pairing with the iJust 3 is the ELLO Duro Sub-Ohm Tank, featuring a 6.5mL maximum juice capacity with retractable top-fill design, auxiliary bottom airflow control, and the utilization of the HW-N Series Coils. The ELLO Duro introduces two new coils: 0.2ohm HW-N Net Kanthal Coil with a wattage range of 40 to 90W and a 0.15ohm HW-M Multihole Kanthal Coil with a range of 50 to 100W.

    Eleaf iJust 3 80W Battery Features:

    • 25mm Base Diameter
    • Integrated 3000mAh Rechargeable Battery
    • Maximum Wattage Output: 80W
    • Minimum Atomizer Resistance: 0.1ohm
    • Stainless Steel Construction
    • Direct Voltage Output System
    • Single Button Operation – Hexagon Firing Mechanism
    • Four Color LED Battery Light Indicator
    • Ergonomic Soft Contour
    • Dual Circuit Protection
    • MicroUSB Port
    • Centered Stainless Steel 510 Connection
    • Available in Silver, Black, Rainbow, Blue, Purple, Red

    Eleaf ELLO Duro Sub-Ohm Tank Features & Specs:

    • 25mm Diameter
    • 6.5mL Maximum Juice Capacity
    • Superior Stainless Steel Construction
    • Convex Pyrex Glass Reinforcement
    • Eleaf’s HW Series Coils
    • 0.2ohm HW-N Net Kanthal Coil – rated for 40-90W
    • 0.15ohm HW-M Multihole Kanthal Coil – rated for 50-100W
    • Convenient Retractable Top-Fill Design
    • Dual Bottom Airflow Control
    • Resin Widebore Drip Tip
    • Detachable Structure
    • 510 Connection

    Includes:

    • 1 iJust 3 Battery – 3000mAh
    • 1 ELLO Duro Sub-Ohm Tank
    • 1 0.15ohm HW-M Coil
    • 1 0.2ohm HW-N Coil
    • 1 MicroUSB Cable
    • Spare Parts
    • Instructional Manual

    NUNCHAKU KIT

    Here comes the newest 2018 vape kit Uwell Nunchaku 80W Pen Style TC Starter Kit With Nunchaku Tank, designed by the popular comapany UWELL. Nunchaku 80W VW Kit is a compact vape device with the luxurious exterior upgrade. It is consists of a new Nunchaku box mod and Nunchaku Sub ohm tank. Powered by single 18650 battery, the Nunchaku fires up to a maximum output of 80W. Made of high quality stainless steel & quartz glass and copper, silicone materials. The Nunchaku is made to be user-friendly, adopting an intuitive OLED display, two adjustment buttons, and a large firing mechanism. Along with multiple work modes, which are power mode, TC mode(NI,SS), By Pass mode. What’s more, Uwell Nunchaku employs a new generation of E-cigarette control panel by Uwell independent R&D, makes the tube as safe as a box mod. So you can safely use. There is a USB port for charging.
    Uwell Nunchaku Atomizer features a huge 5ml ejuice capacity and an unique Plug-pull coils, which is easy to replace. Also comes with a drip tip cover(to cover the drip tip when it is not used). The Nunchaku 80W VW Mod With Nunchaku Tank will bring a fresh experience – mass clouds, rich flavor and a amooth airflow!

    Specification:
    Tank Capacity: 5ml
    Mod Size: 27.4mm(d) x 94.5mm(h)
    Material:stainless steel & quartz glass & copper &silicone
    Power Range: 5-80W
    Working Modes: Power Mode, TC Mode(Ni, SS), Bypass Mode
    Battery Type: 1 x 18650
    Standby Current: <50μA
    Voltage Range: 0.7V-7.0V
    Resistance Range: 0.1Ω-3Ω(VW), 0.1Ω-1Ω(TC), 0.1Ω-0.5Ω(Bypass)
    Temperature Range: 200°F-600°F/100°C-300°C
    A new generation of E-cigarette control panel by our independent R&D, makes the tube as safe as a box mod.
    Replacement 18650 battery or charge over usb
    Plug-pull coils, easy to replace.
    Color: Iridescent, Iridescent, Purple, Black&Gold, Stainless Steel, Full Black, Sapphire Blue, Metallic Green

    Package Includes:
    1 x Nunchaku Mod
    1 x Nunchaku Atomizer
    1 x Extra Quartz Glass
    1 x 0.25Ω Coil(pre-installed)
    1 x 0.4Ω Coil
    1 x Pack of Replacement O-rings
    1 x Micro USB Cable
    1 x User Manual
    1 x Drip Tip Cover(used to cover the drip tip while not using)

    Baby Mag Kit

    Here comes the newest SMOK MAG BABY KIT! As the mini edition of SMOK MAG Kit, MAG BABY KIT consists of MAG BABY MOD and TFV12 Baby Prince Tank. It features built-in 1600mAh battery and supports for up to 50 watts of output power. Also, MAG BABY KIT supports for temperature control/power smart dual mode, allowing you to enjoy a different taste and smoke. Combined with TFV12 Baby Prince Tank, it will bring you denser cloud and purer flavor. This time SMOK MAG BABY KIT will change your vaping experience again! 9 colors for you to choose.
    Parameters
    MAG BABY MOD
    Size: 61.37x46x27mm
    Output Power: 1W-50W
    Standby Current: <400uA
    Output Voltage: 0.5V-9.0V
    Resistance Range: 0.1Ω-2.5Ω (VW) / 0.05Ω-2Ω (TC)
    Temperature Range: 200℉–600℉/100℃–315℃

    TFV12 Baby Prince Tank
    Capacity: 4.5ml
    Size: 53.7mm (H) * 26mm (D)
    Material: Stainless Steel
    Thread: 510
    SMOK MAG BABY KIT with TFV12 Baby Prince Tank 50W comes with
    1 x Mag Baby Mod
    1 x TFV12 Baby Prince Tank
    1 x V8 Baby-Q2 0.6Ω Dual Coils (Pre-installed)
    1 x V8 Baby-M2 0.25Ω Dual Coils
    1 x Replacement Glass Tube
    1 x USB Cable
    1 x User Manual
    Spare Parts

    .

    VOOPOO MOJO KIT

    Voopoo mojo Kit 88W comes with the MOJO Box Mod and UFORCE tank. With the built-in 2600mah battery, it wattage can fire up to 88W. It features the powerful Gene Chip that has the fastest fire speed. Besides, VOOPOO MOJO embraces powerful functions and fashionable appearance. Paired with the strong flavor UFORCE tank, the VOOPOO MOJO 88W kit will be the unique high-quality Gene Chip vape kit. 7 colors available.
    Parameters
    Airflow Adjustable: Bottom
    Fill Liquid: Top
    Power Range: 5W-88W
    Resting Current: ≤20μA
    Input Voltage: 3.2V-4.2V
    Output Voltage: 0V-8.5V
    Resistance Range: 0.05Ω-3.0Ω (Power Mode), 0.05Ω-1.0Ω (TC Mode)
    Temperature Range: 100°C-315°C / 200°F-600°F
    With Cell: Lithium 2600mAh Built in
    VOOPOO MOJO Kit 88W with UFORCE Tank comes with
    1 x VOOPOO MOJO 88W TC Mod
    1 x UFORCE Tank
    1 x UFORCE U2
    1 x Glass Tube
    6 x Sealing O-Ring
    1 x USB Cable
    1 x GENE Chip Card
    2 x User Manual
    1 x Warranty Card

    Sigelei Fuchai Squonk 213

    Fuchai Squonk 213 Mod Kit is latest squonker device from Sigelei, which is consists of Fuchai Squonk 213 Mod and an unique square shaped RDA atomizer. Compatible with 21700,20700,18650 battery(only included 21700), max wattage can go up to 150W with the super power 21700. The mod comes with a 0.96 inch TFT color screen that indicates vaping ststus from resistance to wattage. Along with 5ml Soft squonk bottom feeding bottle for easy squeezing instead of dropping. Fuchai Squonk is a new memeber of Fuchai family as well as in the BF mod market.

    Specification:
    Size: 88.5*45*31mm
    Main Material: aluminium alloy+zinc alloy
    Display: 0.96″TFT color screen
    Wattage Range: 10W-150W
    Modes: POWER/Ti1/Ni200/304/316/317
    Battery Type: 1*21700 /1*20700 /1*18650(only included 21700)
    Resistance Range: 0.1Ω~3.0Ω
    Bottle Capacity: 5ml
    Coil Supporting: Kanthal/SS(304/316/317)/Titanium/Ni200/TCR
    Color: Black, Yellow, Blue, Red

    .

    Vaporesso Revenger Starter Kit

    The Revenger Kit by Vaporesso is 100% authentic in performance, quality and brand– no clones here! The exclusivity behind the Revenger is that is uses the most advanced chipset OMNI Board 2.0 with a range of 5 to 220W, and multiple output modes. Not to be outdone, the aesthetics of the Revenger make it stand out among its competitors.

    Not to be outdone, the NRG Sub-Ohm Tank features GT Cores in traditional and CCELL Ceramic coil. This assists in the heating process of your e-Liquid with the heating insulation layer on the bottom of the tank. To add, the Slide-n-Fill design makes refilling the tank a lot more convenient while reducing spills, leaks and flooding.

    The Revenger Kit by Vaporesso operates off of two 18650 High Amp batteries (sold separately) and is available in Blue, Black or Red.

    Smok Mag 225w TC STARTER KIT **NEW RELEASE**

    The SMOK MAG 225W TC Starter Kit is 100% authentic in power, performance, and brand! The MAG 225W TC Starter Kit delivers exclusivity by incorporating a technologically advanced chipset that’s paired with the TFV12 Prince Tank!

    For starters, the included SMOK Mag 225W TC Box Mod is an innovative device that puts out dynamic power from a single firing switch. Once the dual 18650 batteries are installed, you’ll get a maximum output of 225 watts and output adjustments that range from the temperature control suite and added Memory Mode. These features add rigor as well a full-suite of protection to the mod. Up-to-date information on the temperature, wattage and battery state are all shown on the full-color OLED screen of the Mag 225W TC Box Mod so you get the status you need at all times.

    The SMOK TFV12 Prince Tank is the newest addition to the SMOK MAG 225W TC Starter Kit. This massive tank has a juice capacity of 8mL! You’re able to fill the tank and vape for hours before having to refill. When you do refill, enjoy the mess-free process with the new button-lock hinged top-fill system. This reduces spills, drips and leaks. Not to be outdone, the dual bottom airflow control makes the vaping process easy and customizable with the ability to have tighter or airier draws.

    The SMOK MAG 225W TC Starter Kit is available in Black/Red, Black/Prism, Gold/Black, Silver/Black, Purple/Black, Green/Black, Navy Blue/Black, Red/Black or Pink/Black

    SMOKtech G-Priv 2 Luxe Edition Starter Kit

    G-Priv 2 Luxe Edition is an advanced version of G-Priv 2.

    It is designed in a modern way, the unique prismatic appearance looks cool and can bring you excellent texture.

    Its 2.0 inch touch screen is highly sensitive, with simply touch you can get the information you want.

    And it has 230W high power, which can definitely satisfy the vapor chaser.

    More surprisingly, it uses revolutionary TFV12 Prince tank, which has unprecedented large capacity, unique Cobra drip tip and powerful cores.

    SMOKtech Rolo Badge AiO Starter Kit

    SMOKtech Rolo Badge AiO Starter Kit Wholesale
    The SMOKtech Rolo Badge AiO Starter Kit is 100% authentic in quality, performance and brand! The Rolo Badge AiO Starter Kit is named appropriately because of the “badge” design which gets its aesthetic title from being compact. The Rolo Badge is completely portable and accommodates those who are new to vaping or fully experienced.

    To add, the technological features of the Rolo Badge add to its exclusivity. The uniqueness of the Rolo Badge is that it features no buttons and automatically activates once you inhale. There’s also a powerful 250mAh built-in battery that assists in the wattage output of 10 to 16W and the voltage output of 3.3 – 4.2V. It also gives energy to the Battery Life LED light that indicates the battery’s status and power available.

    The Rolo Badge AiO Starter Kit comes with empty refillable cartridges that can be filled with your favorite e-Liquid, holding a maximum of 2mL. Charging the Rolo Badge is a cinch, as it utilizes the included micro USB cable which can be connected to a computer.

    Suorin Air

    All-in-One Card-Style Starter Kit is 100% authentic in performance, power and authenticity! The exclusivity behind the Suorin Air is that it is an extremely compact and ultra-portable device that can easily fit in your pocket or purse. The aesthetics on the Suorin Air are what also make this device a stand-out kit among its competitors. Its design is lightweight because of the aluminum housing and makes toting it around a cinch. 

    Not to be outdone, the Suorin Air adopts a classic style by coming equipped with 400mAh automatic batteries which may be recharged using the micro USB charging port located on the bottom of the device. The Suorin Air also features a no-button style and is automatically activated once you begin inhaling.
    The Suorin Air All-in-One Card-Style Starter Kit is occupied with a magnetic 2.0mL refillable cartridge system which can easily be filled with your favorite e-Liquid.
    Available in Rose Gold, Gold, Silver or Red
    Package Contents:
    1 x Suorin Air
    1 x Suorin Air Cartridge
    1 x Micro USB Cable
    Product Specifications:
    Dimensions: 3-3/8″ x 1-3/4″ x 1/4″
    Classic Automatic Style
    Magnetic Refillable Pod/Cartridge System
    All-in-One Device
    Capacity: 2.0mL
    Built-in Battery Capacity: 400mAh
    Output Wattage: 16W
    Battery Life Indicator
    Aluminum Housing
    Lightweight and Compact Design
    Utilizes Suorin Air Refillable Cartridges
    Micro USB Charging Port
    Available Color: Rose Gold, Gold, Silver or Red

    Suorin Drop AiO Starter Kit

    The Suorin Drop All-in-One Starter Kit is 100% authentic in performance, quality and brand. The Suorin Drop is exclusive because it’s extremely portable and makes carrying it around with you a cinch.
    For starters, the Suorin Drop is occupied with a distinct unique water drop design which adds to the extremely light and dense body made from zinc alloy. The Suorin Drop features no buttons and automatically activates when you inhale. This is in part due to the built-in 310mAh battery which can be recharged using the micro USB charging port located on the bottom of the device.
    Not to be outdone, the Suorin Drop uses a 2.0mL refillable cartridge system which allows for a couple of vaping before having to refill. Please note that the Suorin Drop is NOT compatible with the original Suorin Air cartridges.
    Available in Red, Black, Yellow, Brushed Gun Metal or Tiffany Blue.
    Package Contents:
    1 x Suorin Drop
    1 x Suorin Drop Cartridge
    1 x Micro USB Cable
    Product Specifications:
    Dimensions: 2-13/16″ x 1-15/16″ x 1/4″ (Including Cartridge)
    Classic Automatic Style
    Refillable Pod/Cartridge System
    All-in-One Device
    Capacity: 2.0mL
    Built-in Battery Capacity: 310mAh
    Maximum Wattage: 13W
    Hidden Battery Life LED Indicator Light
    Zinc Alloy Construction
    Water Drop Design
    Lightweight and Compact Design
    Optimized for 70% VG / 30% PG E-Liquid
    Utilizes Suorin Drop Refillable Cartridges – 1.3ohm ~ 1.4ohm
    Micro USB Charging Port
    Available Colors: Red, Black, Yellow, Brushed Gun Metal or Tiffany Blue

    ASPIRE SPEEDER KIT **NEW RELEASE**

    The Aspire Speeder Starter Kit (200 W) is 100% authentic in quality, brand and performance! The exclusive features embedded in the Aspire Speeder provide powerful performance and durability.

    For starters, the Aspire Speeder Mod fires up to 200 watts and supports Nickel 200, Titanium, Stainless Steel 316 and TCR (T-cell receptor) in temperature control modes. The Speeder also features bypass and stealth modes as well. Not to be outdone, the Speeder Mod is equipped with adjustable power settings that preheat the mod before activating the fire button. This mod is incredibly easy to use and is comfortable enough for portability.

    The Aspire Athos Sub-Ohm Tank is exclusive in its own right because it releases thick and massive clouds of vapor along with precise flavors. The top-fill design makes filling the tank a cinch and you’re able to vape for hours with the juice reservoir that has a capacity of 4.0mL. The Athos Sub-Ohm Tank features a clear wide bore drip tip that is fits perfectly with the design of Athos. The Athos tank utilizes A5 and A3 kanthal atomizer heads with multiple wicking slots that are designed for variable wattage. The Athos A5 Penta Coil 0.16ohm atomizer head can fire up to 120 watts while the Athos A3 Triple Coil 0.3ohm atomizer head can fire up to 75 watts.

    Available in Gold with White. High Amp 18650 Batteries are sold separately.
    Package Contents:
    1 x Aspire Speeder Mod
    1 x Aspire Athos Sub-Ohm Tank
    1 x Athos A5 Penta Coil 0.16ohm Atomizer Head (Pre-installed)
    1 x Athos A3 Triple Coil 0.3ohm Atomizer Head
    1 x Black Extra Wide Bore Delrin Drip Tip
    1 x Replacement Glass
    1 x Micro USB Cable
    1 x Set of Spare O-Rings
    Requires:
    2 x High Amp 18650 Batteries (Sold Separately)
    Product Specifications:
    Aspire Speeder Mod:
    • Dimensions: 3-1/2″ x 1-13/16″ x 1-1/16″
    • Spring Loaded 510 Contact Pin
    • Wattage Range: 1.0W – 200.0W
    • Output Voltage Range: 0.01 – 8.4V
    • Temperature Control: Nickel 200, Titanium, Stainless Steel 316 and TCR
    • Temperature Control Range: 200 – 600F / 100 – 315C
    • Resistance Range: 0.1ohm – 3.5ohm
    • Bypass Mode
    • Customizable Power Settings for Preheat Function (CPS)
    • Stealth Mode
    • Automatic Screen Orientation Adjustment
    • Hidden Side Fire Button
    • 0.96″ OLED Display Screen
    • Bottom Battery Door Cover
    • Micro USB Charging Port
    • Firmware Upgradeable
    • Automatic Cut Off
    • Short Circuit Protection
    • Low Resistance Protection
    • Overcharge Protection
    • Overdischarge Protection
    • Reverse Battery Protection
    • Available Color: Gold with White
    Aspire Athos Sub-Ohm Tank:
    • Dimensions: 2-1/4″ x 1″ (Including Drip Tip and Threads)
    • Diameter: 25mm
    • 510 Threaded
    • Capacity: 4.0mL e-Liquid
    • Top-Fill Design with Twist Off Cap
    • Protective Metal Sleeve Design
    • Glass Tank
    • Stainless Steel Construction
    • Triple Airflow Slots
    • Adjustable Airflow Control Valve
    • Multiple Wicking Slots

    SMOK ProColor Kit

    Product introduction
    SMOK new product. It comes with the ProColor 225 wattage mod, which has the industry’s leading design and new features. It has RGB backlights shaped like a shield and a super large OLED colorful screen of 1.3 inch with high definition. Besides, it owns a totally new designed software interface, a fire bar of ergonomic hand feel design, the included sub ohm tank is the world famous and beloved TFV8 big baby tank. All of these features will show you perfect self, innovation keeps changing the vaping experience!
    Parameters
    Mod Size: 85x46x29.5mm
    Power Range:6W-225W
    Input Voltage: 6.4V-9.0V
    Output Voltage:0.5V-9.0V
    Standby Current:<500uA
    Input Voltage: 6.4V-9.0V
    Resistance Range: 0.1ohm-3ohm (VW) /0.06ohm-3ohm (TC)
    Temperature Range: 100°C-315°C
    SMOK TFV8 Big Baby Tank (Standard)
    Material:Stainless Steel
    Size: 24.5mm x 56mm
    Tank Capacity: 5ml
    Thread: 510
    SMOK TFV8 Big Baby Tank (EU Edition)
    Material:Stainless Steel
    Size: 24.5mm x 56.2mm
    Tank Capacity: 2ml
    Thread: 510
    SMOK ProColor Kit comes with
    1pc ProColor
    1pc Tfv8 Big Baby Tank
    1pc V8 Baby-Q2 Dual Coils
    1pc V8 Baby-T8 Octuplet Coils
    1pc Replacement Glass Tube
    1pc USB Cable
    1pc User Manual
    and Spare Parts

    Eleaf iStick Pico 75W TC Kit (Now 25% OFF)

    Eleaf which is the manufacturer of the original iStick series, is happy to introduce the Eleaf iStick Pico 75W TC Kit which includes the Pico device and the Melo 3 Mini tank. The iStick Pico 75W TC Kit which stands for Preferable, Innovative, Compact and Outstanding (PICO) offers an incredible vaping experience at a portable and convenient size. Building upon the the Eleaf iStick 60W TC, the upgraded Eleaf iStick Pico 75W not only delivers a satisfying amount of vapor at a 75W maximum output, but it also comes with the smart technology of temperature control supporting both Nickel 200 (Ni200), Titanium (Ti), and Stainless Steel 316 (SS316) coils. The Eleaf iStick Pico 75W also features Bypass and Temperature Coefficient of Resistance (TCR) modes.
    The iStick Pico 75W features a device that easily fits in the palm of your hand with the ability to replace and switch out your batteries. The iStick Pico 75W requires (1) high amp 18650 battery (sold separately) which is easily replaceable with the conveniently placed battery cap located right next to the contact pin. The device may be charged and is firmware upgradeable via the Micro USB Port. The iStick Pico 75W is currently available in five different colors such as Black, White, Silver, Hot Pink and Grey to match your own personal preference.
    The Eleaf Melo 3 Mini is the perfect tank to complement the iStick Pico due to it’s small size. The Melo 3 Mini features a eliquid capacity of 2.0ml. The Eleaf Melo 3 is remarkably easy to refill due to the top-fill feature. The Eleaf Melo 3 Mini features an invisible adjustable airflow control valve for great amounts of vapor production. The Melo 3 Mini features a sturdy and beautiful 304 Stainless Steel construction with a glass tank. When used with the 100% pure cotton Eleaf EC Kanthal/TC-Nickel/EC TC-Titanium atomizer heads, the Eleaf Melo 3 Mini features an amazing vaping experience when paired up with the iStick Pico 75W Kit.

    Note: Only 7/8″ (22mm) diameter tanks will fit on the iStick Pico due to the protruding battery cap.

    Features and Specs for iStick Pico 75W TC Device:

    • Dimensions: 2-3/4″ x 1-3/4″ x 7/8″ (without Melo 3 Mini)
    • 510 Threaded
    • Operating Wattage: 1.0 to 75.0 W
    • Temperature Control: Nickel 200 (Ni200), Titanium (Ti), Stainless Steel 316 (SS316), TCR Modes
    • Temperature Control: 100-315 ° C / 200-600 ° F
    • Bypass (Direct Output Voltage) Mode
    • Resistance: 0.1 – 3.5 ohm in Variable Wattage/Bypass Mode
    • Resistance: 0.05 – 1.5 ohm in Temperature Control mode
    • OLED Display Screen
    • Requires (1) High Amp 18650 battery (Sold separately)
    • Micro USB Charging Port (Micro USB Cable included)
    • *External charger recommended for faster charging speeds*
    • Firmware Upgradeable
    • Ventilation Holes for Improved Heat Dissipation
    • Adjustment Buttons located on the Bottom of the Device
    • Atomizer Protection
    • Atomizer Low Alert
    • Weak Battery Alert
    • Low Voltage Protection
    • Temperature Protection
    • Temperature Alert
    • Short Circuit/No Atomizer Protection
    Features and Specs for Melo 3 Mini:
    • Dimensions: 2-1/4″ x 7/8″ (Including Drip Tip and Threads)
    • 22mm Diameter
    • 510 Threaded
    • 2.0ml liquid Capacity
    • 304 Stainless Steel Construction
    • Glass Tank
    • Invisible Adjustable Airflow Control Valve
    • Convenient Top-Fill Feature
    • 100% Pure Cotton Atomizer Heads
    • Uses Eleaf EC, EC-TC Nickel, or EC-TC Titanium Atomizer heads
    Please note: Temperature control requires the use of nickel, titanium, or stainless steel coils.
    Package Contents:
    • 1 x iStick Pico 75W TC Device
      1 x Melo 3 Mini Tank
      1 x EC Kanthal 0.3 ohm Atomizer head (Preinstalled)
      1 x EC Kanthal 0.5 ohm Atomizer Head
      1 x Spare Bag of O-rings
      1 x Micro USB Cable

    Joye eGo AIO "All-in-one" Starter Kit

    Joyetech is proud to introduce a compact starter kit called the the eGo AIO (All-in-one) designed for beginners or users looking for a new lightweight setup. Joye eGo AIO features a tank and a built-in battery also know as the “All-in-One” design. This “All-in-One” design combines a very slim compact shape with the very convenient battery and tank combo.
    The Joye eGo AIO features the Leak-Resistant Cup technology from the Cubis and adds a child-lock feature. The tank is also conveniently filled from the top. The built-in battery has a capacity of 1500mAh and comes in various colors. The Joye eGo AIO can be charged via Micro USB Cable which is included. You can also adjust the indicator light to either red, yellow, green, blue, indigo, white, or purple to match your own personal style and preferences.
    The Joye eGo AIO “All-in-One” Starter Kit is perfect for beginners looking to start vaping without being overwhelmed. The eGo AIO features a simple to use one-button design and includes almost everything you need to get started.

    Please note, the Joye eGo AIO is NOT compatible with temperature control coils such as Nickel. The Joye eGo AIO is also NOT compatible with the NotchCoil 0.25ohm.

    Features and Specs:

    • Dimensions: 4-3/4″L x 3/4″D (including Tip)
    • 19mm Diameter
    • All-in-One Design
    • Perfect for beginners
    • Simple One-Button Design
    • 2ml e-Liquid Capacity
    • 1500 mAh Battery Capacity
    • Utilizes the Cubis Leak-Resistant Cup Design
    • Top-filled
    • Choose from 7 Indicator Light Colors
    • Adjustable Airflow Valve
    • Charged via Micro USB
    • Overcharge Protection
    • Over-current Protection
    • Over-discharge Protection
    Package Contents:
    • 1 x Joye eGo AIO
      2 x BF SS316 0.6ohm Atomizer Heads
      1 x Spiral Drip Tip
      1 x Glass Drip tip
      1 x Micro USB Cable

    Returns and Warranty

    We will gladly accept the return of products that are defective due to defects in manufacturing and/or workmanship. Mistakes that we make resulting in the shipment of incorrect products to you will also be accepted for return 30 days from the date of purchase.
    NO returns will be accepted without a Receipt. 
    In-store purchases have a 3 day manufactures defect warranty.
    Eligibility for refunds, repairs or exchanges is limited to products determined to have manufacturing defects or premature failure. Products that are damaged through misuse, negligence, abuse or modified are not eligible for exchange. Please contact us if you feel you have a problem with your product.